Eleaf HW1 iJust Nexgen coil (5 pcs)
Product ID: 494
Eleaf engineered new HW series coils. Consisted of SS316L coil, the HW1 Single-Cylinder 0.2 ohm Head is capable of working under high wattages and compatible with various vaping modes, providing you with a large amount of vapor production.
- Diameter: 15mm
- Height: 20mm
- Best Wattage: 40 - 80W / Manufacturer's Recommended Wattage Range: 50 - 65W
Eleaf HW1 Head comes with
5pcs Eleaf HW1 Head
N.B: Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email (firstname.lastname@example.org).